Still OCV 01 - Information about Documentation; Documentation Scope; Supplementary Documentation

Information about documentation
Documentation scope
●
Operating instructions
●
Operating instructions for attachment parts
(special equipment)
●
Spare parts list
These operating instructions describe all
measures necessary for the safe operation
and proper maintenance of the truck in all
possible variants at the time of printing. Spe-
cial designs to meet customer requirements
are documented in separate operating instruc-
tions. If you have any questions, please con-
tact your service centre.
Enter the production number and the year of
production located on the nameplate in the
field provided:
Production no. ...........................................
Year of produc-
tion ...................................................
Please quote these numbers for all technical
enquiries.
Operating instructions are provided with each
truck. These instructions must be stored care-
fully and must be available to the driver and
operator at all times.
If the operating instructions are lost, the oper-
ator must immediately request a replacement
from the manufacturer.
The spare parts list can be reordered there as
a spare part.
Personnel responsible for operating and main-
taining the equipment must be familiar with
these operating instructions.
The operating company (see the chapter “Def-
inition of responsible persons”) must ensure
that all operators have received, read and un-
derstood these instructions.
Thank you for reading and complying with
these operating instructions. If you have any
questions or suggestions for improvements, or
if you have found any faults, please contact
your service centre.
Supplementary documentation
This industrial truck can be fitted with a C usto-
mer
O ption ( CO ) that deviates from the stand-
ard equipment and the variants.
This CO may consist of:
●
Special sensors
●
A special attachment
●
A special towing device
●
Customised attachments
When fitted with a CO, the industrial truck is
provided with additional documentation. This
may take the form of an insert or separate
operating instructions.
The original operating instructions for this
industrial truck are valid for the operation
of standard equipment and variants with-
out restriction. The operational and safety
Introduction
1
Information about documentation
 10 5091 801 1525EN-12/2022 - 06