Still OCV 01 - Changing Electrical Fuses; Recommissioning; Check Lowering Cut-Off

Changing electrical fuses
– Prepare the truck for maintenance and re-
pairs.
NOTE
Please see section: "Parking the multi function
vehicle securely".
NOTE
Please see section: "Prepare the truck for
maintenance and repairs".
– Open the cover.
– Check rating of all fuses in accordance with
table, replace if necessary.
Fuse 10A installed on main harness.
Item Fuse type Rating
1
Traction /
Lift / Steer
motor Fuse
200A
2 Controller 10A

Recommissioning
The truck may only be recommissioned after
cleaning or repair work, once the following op-
erations have been performed.
●
Test horn.
●
Test Emergency stop switch.
●
Test brake.
●
Lubricate the truck in accordance with the
maintenance point.
●
Do follow the daily checklist.
Check lowering cut-off
procedure:
– Open the emergency opration area;
– Press the "Lifting” button”to raise the plat-
form;
– Place the object on the lower cut-off;
– Try to lower the operator platform;
– Press the "Lowering” button”.
Maintenance
5
Maintenance work
 1035091 801 1525EN-12/2022 - 06