Still OCV 01 - Lifting, Lowering

Reverse braking
– While the vehicle is travelling, press the
travel switch into the opposite travel direc-
tion and the vehicle decelerates.
– Turn to stop before the truck starts to travel
in the opposite direction.
With the coasting brake
– Let the travel switch return to zero position,
the truck is braked.
Releasing the dead man switch has same ef-
fect.
WARNING
This method of braking should be only used as a
parking brake, not as service brake.
With the emergency brake
– Press the emergency stop switch.
The vehicle brakes until it comes to a halt.
WARNING
The emergency stop switch must only be used in
dangerous situations.
Parking brake
The mechanical brake applies automatically
when the truck comes to a halt.
Lifting, Lowering
– Close the safety gates(3).
– Insert the key in the key switch(8) and turn
it to the “ON” position.
– Pull up the emergency stop switch (5).
– Right hand in sensor switch position(6).
– Apply the drive deadman switch(7).
– Drive the truck carefully up to the storage
location(4).
Lifting

Operation
4
Drive operations
 675091 801 1525EN-12/2022 - 06