STM SatLink VSAT - Page 28

SatLink VSAT User Guide
Publication no. 101557
Rev 14.1.1-2
Copyright 2006-2012 – STM Group, Inc.
Page 27 (182)
1) Click on the Configuration  Satellite option in the SatLink VSAT home page.
Figure 22: VSAT Positioning
2) Configure the VSAT positioning parameters as shown in the following table.
Parameter
Description
Latitude
Enter the latitude (deg, min, sec and direction).
Longitude
Enter the longitude (deg, min, sec and direction)
Altitude
Enter the altitude (meters)
3) Click the Save button to save the configuration.