Stonex S10A GNSS Receiver – User Manual 35
Do NOT calibrate S10A/S10AN close to strong magnetic fields
environments.
Save time configuring S10A to get automatic FIX position before to go to
the calibration location; this can be set from the WebUI, by selecting the
option Auto connect: (Set yes). The Auto connection will be effective as the
unit will be switched ON.
Since the internal smart battery is a source of magnetic fields, the
calibration procedure MUST be repeated for each battery; the battery
magnetic parameters are stored together with the battery S/N. S10A will
recognize the current battery and the correct calibration parameters will be
automatically set.
To Next Page
Loading...
