16
6.1.4 Using the CH+/CH- buttons
CH+ will switch to a higher channel.
CH will switch a lower channel.
6.1.5 Using the 9 button
Use the 9 button for switching between the two last viewed channels
6.2 Info Banner
At any time during viewing mode you can press the INFO button to get information about the current
channel as well as the current and following programme*. Press INFO twice to view detailed info of current
and following programmes and technical details about the current channel. Press INFO again or to close
the information.
You can change the on-screen duration of the info banner in the System Setup menu. Please refer to section
7.3.6.1 OSD Setting for more details.
*Programme information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of dierent audio formats and/or languages. To select another audio
stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use pq to
select a stream and conrm with OK. With the tu buttons you can choose between Mono, Mono left, Mono
right or Stereo
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TEXT button in viewing mode
and use the 0~9 or buttons to select the number of the page you wish to see. Subpages (if loaded and
available) can be selected with the tu buttons. With Auto selected, the pages will rotate automatically.
Press TEXT again or to go back to viewing mode.
6.5 Subtitles
Some programmes support a choice of dierent DVB subtitle languages. Press the SUB button in viewing
mode to display a list of available subtitle languages. Use pq to select a subtitle language and conrm
with OK.
6.6 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to watch programme schedules
and information on screen. Press the EPG button to activate this guide. Use pq to select a channel. In the
programme list, use tu to select or scroll through programmes to display programme information for
the next/previous days. Press OK to read programme information. Press GREEN timer to book the selected
programme for a wake-up timer. To change time or day in bigger steps, press RED time and use tu to
highlight the step options and OK to speed up selection. Options are: Step one by one, Steps in hours, steps
in 24 hours. pq will still control the channels. Press to return to the main window.
NOTE: Availability of EPG data depends on broadcast.
Booking a programme from EPG reminder/wake-up on start time of program
Select a programme as described above. Press GREEN when you have selected a programme. This will lead
you to the Timer (Schedule) menu. All details are already lled in for you. Save the timer by selecting Save
and press OK. To display the list of booked events got to the main menu, system setup, Timer setting. You
can also edit timers here. Please refer to section 7.3.6.1 Timer Setting
for more details.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
