17
6.7 Favourite channels
Use the FAV button to access your favourite channels lists and use tu to toggle between available
favourite groups and general channel lists. Please refer to section 7.3 for details on how to create favourite
lists.
7. MAIN MENU
Throughout the menu: Press MENU and select items by using the pq buttons. Press OK or the u button to
enter the items.
7.1 Installation menu
7.1.1 Installation
Here you can setup your dish and satellite parameters. Enter the menu via the Installation In this menu
setting will be automatically stored upon exit without the need of conrming.
NOTE 1: If Germany is chosen as Region in the Welcome page for the rst time installation, then a German
channels pre-set list is available, it is Default set to On, assuming the satellite dish is pointed
at Astra 19 East. Then select Channel Search and press OK, the next page will ask you to Select
your local channel, which then will be stored on program number 3 in the pre-set list. The Local
program becomes active only on certain times, at other moments the Main program is running.
The receiver will automatically switch between the select number 3 program and the main
program.
NOTE 2: Because the receiver does not know which program of the number 3 channel is active (Main or
Local) at the moment of installation for the rst time, it must probe shortly if there are automatic
switching channels active or not. This may cause for a short time a black screen, while the pre-set
channel list is updated accordingly. This will only happen 1x a group (“transponder”) of channels
is reached.
Antenna Connection
Enter here to select the type of satellite dish or antenna you have: Either a xed antenna or a motor antenna
Satellite List
In this menu you can select the satellites for which you have a particular interest, like if they carry
programmes which are especially aiming at your country. In the satellite search menu's, these satellites can
be searched to obtain programs.
Select one or more satellite from the list to search with OK. A heart symbol will appear behind the name.
To deselect, press OK again.
In case you need to make manual changes to the satellites present in the default list:
To Edit the Satellite name and position press RED. Use the numeric buttons to enter characters. Conrm with
YELLOW.
To Add a Satellite, press GREEN. Use the numeric buttons to enter characters to enter a new Satellite's name
and position. Conrm with YELLOW.
To Delete a Satellite, select the Satellite from the list and press BLUE. Conrm the pop-up screen.
Antenna Setup
In this menu you can enter the Dish parameters, depending on the selection in Antenna Connection
for Fixed Antenna or Motor Antenna and Satellites selected in the Satellite List
Satellite Shows the Satellites selected in the Satellite List
Press OK to view a pull down list with the selected satellites
LNB Press tu or OK to show the list of LNB Types. The Universal LNB frequencies
(09750/10600 MHz) are supported – the most used on the market.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
