30
Audio Decoder
Audio decoding: MPEG-1/2 Layer 1 & 2, AC3, Dolby and Dolby Plus
Audio mode: Mono L/R, Stereo,
Audio Support: E-AC3, Dolby Digital, Dolby Digital Plus*
Sampling rate: 32, 44.1, 48 kHz
*Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
Tuner
Type1: F Type, IEC169-24, Female
Input frequency range: 950 – 2150 MHz
RF impedance: 75 Ohm unbalanced
Signal level: -65 to -25 dBm
LNB power: 13/18 V DC (+/- 5%), max. 0.5 A, overload protected
Switch versions: DiSEqC 1.0, 1.1
LNB options: Universal, SatCR (max. 8 users)
Motor drive options: DiSEqC 1.2, GotoX (DiSEqC 1.3)
System & Memory
Main processor: Ali M3510G
Flash memory: 8 MB
System memory: 64 MB
Multimedia
Video playback: Supported in various formats and containers (MPG, MPEG, TS, VOB,
MP4, H264 (no H265) max 1080x1920.)*
Audio playback: MP3, Flac*
Picture view: JPG, BMP*
*STRONG cannot guarantee the playback of les although extensions are listed, as it depends on codec used, data bit rate and resolution (all MPEG codec formats
are supported).
Connectors
SAT IN
USB 2.0 port: 5 V/500 mA (max.) supported
HDMI
S/PDIF (coax.)
Power adapter (12 V, 1.5 A)
General Data
Power supply: AC 100 – 240 V ~ 50/60 Hz (wall adapter)
Input voltage: DC 12 V 1.5 A
Power consumption: < 18 W
Power consumption in standby: max. 0.65 W
Operating temperature: 0 ~ +40 °C
Storage temperature: -10 ~ +70 °C
Operating humidity range: 10 ~ 95% RH, Non-condensing
Size (W x D x H) in mm: 171x104x41 incl. feet + connectors
Weight in kg: 260g
To Previous Page
Loading...
