STW TC1 - Page 111

7 Teleservice Application Framework
User Manual 111/374
Low Level Hardware Access
LED
Path
Input
information
Output
information
Description
User LED
/tmp/LED_User
p1 p2
-
This file includes the parameters of the
'User' states
p1: defines the color of the LED
 < 1 > = red
 < 2 > = green
 < 3 > = yellow
 < 4 > = blue
 < 5 > = pink
 < 6 > = cyan
 < 7 > = white
p2: defines how often the signal should
flash
 < 0 > = ON for 2 seconds
 < 1 > = flash 1 time
 < x > = flash x times
STW LED
/tmp/LED_Error
p1 p2
-
This file includes the parameters for the
'Error' states
p1: defines the color of the LED
 < 2 > = green
 < 3 > = yellow
 < 4 > = blue
 < 5 > = pink
 < 6 > = cyan
 < 7 > = white
p2: defines how often the signal should
flash
 < 1 > = flash 1 time
 < x > = flash x times
NOTE:
If the parameters of the LED_User/LED_Error file deviate from the description above, the file will not
be taken into account.