To Next Page

To Previous Page

8 Development Tools

User Manual 269/374

Change the buildroot package configuration:

1. Go to the base folder of buildroot target project

2. Execute ./bat/buildscripts/do_defconfig to load the default configuration

3. Execute ./bat/buildscripts/do_menuconfig to open the Builtroot target configuration

4. Change the configuration as needed, see chapter Enable or Disable Buildroot Packages (see "Enable or

Disable Buildroot Packages" on page 271)

5. Update the STW rootfs version (menuconfig->Set STW Version )

6. Save and exit menuconfig

7. Build the rootfs with the changed configuration:

./bat/buildscripts/do_make

8. Test the new rootfs by updating the TC1 (see chapter Update the Device (see "Update the Device" on page

307))

9. Set the new configuration to be the default configuration:

./bat/buildscripts/do_savedefconfig

Root file system version management

The STW rootfs version is configured by option BR2_STW_VERSION in the defconfig file. It can be changed

either by editing the defconfig file or via the menuconfig->Set STW Version. The version of the final rootfs can

be read in file /etc/br_version.

STW TC1 User Manual

Questions and Answers: