8 Development Tools
User Manual 290/374
8. Navigate to the tab "Program Files" enter the following settings:
C compiler: powerpc-stw-linux-uclibc-gcc
C++ compiler: powerpc-stw-linux-uclibc-c++
Linker for dynamic libs: powerpc-stw-linux-uclibc-g++
Linker for static libs: powerpc-stw-linux-uclibc-ar
Debugger: powerpc-stw-linux-uclibc-gdb
Make program: make
9. Click "Set As Default" to set the settings for the default settings.
10. Click "OK" to accept the changes.
To Next Page
Loading...