6 Software
User Manual 67/374
Connect to TC1 from linux based systems for file sharing
Configure the device for file sharing from a linux based system by setting up a specific communication device in
/etc/bluetooth/rfcomm.conf.
# RFCOMM configuration file.
rfcomm0 {
# Automatically bind the device at startup
bind yes;
# Bluetooth address of the device
device 00:15:83:41:79:8D;
# RFCOMM channel for the connection
channel 7;
# Description of the connection
comment "Linux VM";
}
It is necessary to gain root privileges. Use the obexfs tool to connect to the TC1 and mount the connection to
bluetooth_test
root@pc-name:# obexfs -b 00:07:80:97:E7:BB /home/bluetooth_test/
To Next Page
Loading...