7 Teleservice Application Framework
User Manual 95/374
Section: Full dataset interval
# Interval for writing a complete dataset to the datalogger file. The interval value is set
in bytes
# Per default, the mechanism is disabled because it's only necessary in combination with
the yserverd
# If "0" is set, the mechanism is disabled (default)
# If the value is > 0 && < 10000, the value will be set to 10000
# If the value is > 1048576 bytes (1024 * 1024 --> 1 MB), the vale will be set to 1 MB
FullDatasetInt 0
To Next Page
Loading...