Suhr Discovery - Modulation and Division Controls

Discovery Delay – ControlsControls
16
Revision: 1.2 (7/1/2021)
tone� A full counter-clockwise position results in no low cut� Full clockwise results in
maximum low cut�
Speed Knob
e [SPEED] knob controls the speed of a LFO (low frequency oscillator), which
controls the delay time around the center of what is displayed on the display� Chang-
ing the delay time automatically like this causes an audible pitch bend in the delayed
signal, causing a chorusing eect� is is commonly known as “modulated delay”�
Depth Knob
e [DEPTH] knob controls how intense the modulation of the delay is� With full
clockwise positions, you will notice audible pitch bending on the delayed signal� At
full counter-clockwise positions, there is no modulation�
Waveforms Button
e [~] button selects one of the 3 waveforms
1. Triangle
2. Sine
3. Square
to modulate the delay time with� e LED also pulses to indicate both speed and
depth of the modulation� e brighter the LED range, the larger the depth and in-
tense the modulation eect�
Division Button
e [DIVISION] button selects one of the 5 divisions selections which is indicated
by the 5 LEDs in the division section
1. Quarter note [1/4]
2. Dotted Eighth note [d1/8]
3. Eighth note [1/8]
4. Triplet note [1/3]
5. Sixteenth note [1/16]