Suhr Discovery - MIDI Program Change Table

Discovery Delay – MIDIMIDI
28
Revision: 1.2 (7/1/2021)
cable�
To Send and Receive the Sysex data, you must enter the global settings and scroll to
8888
� For more information regarding editing Global Settings, refer to page 31�
Selecting
8888
will immediately begin transmitting all preset data to the receiv-
ing device�
Selecting
8888
will display four dots on the display� Once data is being received
from the MIDI IN jack, a counter on the display will count up to 100, then the dis-
play will show “donE” when complete�
MIDI Table
PROGRAM CHANGES (PC#)
PC# (Decimal) FUNCTION
0 Preset 1
1 Preset 2
2 Preset 3
3 Preset 4
4 Preset 5
5 Preset 6
6 Preset 7
7 Preset 8
8 Preset 9
9 Preset 10
10 Preset 11
11 Preset 12
12 Preset 13
13 Preset 14
... ...
122 Preset 123
123 Preset 124
124 Preset 125
125 Preset 126
126 Preset 127
127 Manual Mode (PEDL) [*Un-Writable Location]