Suhr Discovery - Secondary Controls and Indicators

Discovery Delay – Overview DiagramOverview Diagram
9
Revision: 1.2 (7/1/2021)
5. Lo Cut Knob
e low cut reduces bass from the delayed signal only� Fully counter-clockwise is no
low (bass) cut� Full clockwise results in maximum low cut�
6. Hi Cut Knob:
e high cut reduces high frequencies from the delayed signal� Fully counter-clock-
wise is the brightest and clearest tone (no high-cut), clockwise will be the darkest�
7. Bypass LED
Turns on when the pedal eect is on and o when the pedal is in bypass mode�
8. Bypass/Preset Down Switch:
e bypass switch engages or disengages the eect� Factory default is true bypass
mode� (Refer to manual to switch between true or buered bypass mode�)
9. Time Division LEDs
Indicates which of the 5 time divisions are selected� 1/4 - Quarter Note, d1/8 - Dot-
ted Eighth-Note, 1/8 - Eighth-Note, 1/3 - Triplet and 1/16 - Sixteenth-Note�
10. Division Button
e Division button selects one of the 5 divisions� Holding the division button will
toggle the display to show milliseconds (ms) or BPM of the delay time� A dot in the
bottom right corner of the display denotes BPM�
11. Regen Knob
e Regen controls how long your delay echoes last for� Full clockwise position will
result in continuous oscillations�