2-2
The power for the T-400S is supplied by AC adapter or battery.
AC operation
Please connect the AC adapter (ADC-15) with T-400S when you oper-
ate with the AC adapter.
CAUTION
1. Please check the voltage of the AC power supply before using.
2. The safety function might be activated when voltage and frequency
which are beyond specification are input to the AC adapter and the
AC adapter will stop operating.
In this case, it is necessary to purchase a new AC adapter. Please
contact our maintenance service center.
3. Please place the AC adapter on an appropriate location so the
power cord can be unplugged promptly in case of emergency. (Do
not make the AC adapter out of reach.)
4. In case AC power supply cord is damaged, replace with approved
cord with appropriate voltage and current rating.
Preparing power supply
Connect the output cord of the AC
adapter to the DC input terminal of
the T-400S.
Plugging
Insert the power cord into the AC adapter
completely.
To Next Page
Loading...
