2-5
The car battery cable PC-V25(option) is required to operate the splicer on DC power
(car battery). Contact a sales representative.
Precautions for battery pack
•
Before using the battery pack for the first time, charge the battery pack.
(The battery is not fully charged before shipping.)
• The battery pack is a consumable. Repeated charging and discharging decreases
battery life.
• Store the battery pack within the following temperature range. Failure to do so may
lead to deterioration in performance.
*Battery pack storage temperature range:
-20°C ~ +50°C (if stored for less than 1 month)
-20°C ~ +40°C (if stored for less than 3 months)
-20°C ~ +20°C (if stored for less than 1 year)
• Do not use or store the battery pack at high temperature, such as in strong direct
sunlight, in cars during hot weather. This may cause leakage of battery fluid.
• If you are not going to use the battery pack for a long period, charge the battery pack
once every 6 months.
・If you are not going to use the splicer, remove the battery pack from the splicer.
When should the battery be replaced?
When the splice frequency decreased extremely with fully charged battery, please
purchase a new battery pack.
When disposing of the battery pack, contact our maintenance service center or fol-
low the local regulations.
DC operation (car battery)
To Next Page
