Sumitomo T-400S - Function Settings

4-13
Function Settings Details
ECO Mode
Saves power consumption by adjusting monitor brightness
and heat shrink oven temperature.
Sleep(Battery) If the splicer is not interrupted on battery operation for a
certain period of time, to minimize power consumption, it
will go into Sleep mode and the monitor will be turned off.
Press any keys except the power key to re-start the splicer.
Auto Power Off(Battery)
If the splicer is in Sleep mode and not interrupted on bat-
tery operation for another certain period of time, it will au-
tomatically switch off. Switch it back on again.
Sleep(AC) If the splicer is not interrupted on AC operation for a certain
period of time, to minimize power consumption, it will go
into Sleep mode and the monitor will be turned off. Press
any keys except the power key to re-start the splicer.
Auto Power Off(AC)
If the splicer is in Sleep mode and not interrupted on AC
operation for another certain period of time, it will auto-
matically switch off. Switch it back on again.
Date(yyyy/mm/dd hh:mm)
Sets the built-in clock to a local time.
Language
Display language can be selected.
(Some languages cannot be selected.)
Buzzer (Key)
A buzzer sound for key pressing is enabled / disabled.
Buzzer (Stop)
A buzzer sound for arc pause is enabled / disabled.
Buzzer (Error) A buzzer sound
for an error detected during the splicing
process is enabled / disabled.
Light for v-groove
Sets the V-groove illumination to ON or OFF.
2/2