Sumitomo T-400S - Daily Cleaning and Maintenance; Component Cleaning Procedures

3-1
Cleaning
To keep excellent splice quality, regular cleaning and inspection are required. Especially
cleaning should be performed before and after each use. We recommend your splicer to
be checked through our maintenance service once a year.
Clean each part with a cotton swab. Please bear in mind that daily cleaning can
maintain splicer performance. Clean components before and after use.
Names of com
p
onents
LED
Electrode cover
plate thumbscrew
& electrode cover
plate
Electrode for
low voltage side
V-groove
Electrode for high
voltage side
V-groove
illumination
Electrode cover
plate thumbscrew
& electrode cover
plate
Bare fiber pad
<Inside of wind hood>
Turn off the T-400S before maintenance work. Failure to do so
may cause electric shock.
Warning
3. Daily cleaning and checking up