Sumitomo T-400S - Page 64

4-9
<Heater program settings>
The heating control
system
Item Details
Name
Allows to edit heater program name.
Abbreviated name Allows to edit heater program name which is displayed on the main
splice screen.
Sleeve ID Name
Allows to edit protection sleeve name.
Template
Allows to choose heater program as a template when new heater
program is created.
Note
Allows to add a note to the selected heater program (up to 21 char-
acters)
Heat up Temp. A Heating element rises up to the set temperature in the first term of a
heating cycle. (Numerical input)
Heating Duration A
Duration of the first term of heating cycle. (Numerical input)
Heat up Temp. B Heating element rises up to the set temperature in the middle term of
a heating cycle. (Numerical input)
Heating Duration B
Duration of the middle term of the heating cycle.
(Numerical input)
Heat up Temp. B
Heat up Temp. A