Installation, Operation, and Maintenance Manual
SUMMIT PUMP MODEL 2196 / 2196-LF / 2196-R / 2796 1
1. INTRODUCTION
This installation, operation, and maintenance manual is designed to help you achieve
the best performance and longest life from your Summit Pump models 2196, 2196-
LF, 2196-R, and 2796.
This pump is an open impeller, centrifugal model with end suction / top discharge.
The pump is designed for handling mild industrial corrosives.
If there are any questions regarding the pump or its application, which are not
covered in this manual or in other literature accompanying this unit, please contact
your Summit Pump distributor.
For information or technical assistance on the power source, contact the power source
manufacturer’s local dealer or representative.
SAFETY
The following message types are used in this manual to alert maintenance personnel
to procedures that require special attention for the protection and safety of both
equipment and personnel:
WARNING!
Failure to comply with the warnings in this
manual could result in personal injury or
death.
CAUTION!
Failure to comply with the cautions in this
manual could result in destruction of or
damage to equipment.
NOTE: Identifies a condition or
procedure which is essential to
proper equipment operation.
To Next Page
Loading...
