Sun Microsystems Netra 240 - Page 9

ix
Figures
FIGURE 1-1 Front Panel Components 3
FIGURE 1-2 Rotating Service Module – Miscellaneous Internal Components and Rear Panel
Components 4
FIGURE 1-3 Hardware Cryptographic Module and Memory 5
FIGURE 1-4 Processor Fans and Heat Sink Assemblies on a Replacement System Board 6
FIGURE 1-5 Location of the Front Panel Indicators 8
FIGURE 1-6 Hard Drive Indicators 12
FIGURE 1-7 Rear Panel Indicators 13
FIGURE 1-8 Ethernet Network Indicators 13
FIGURE 2-1 Netra 240 Server Tip Hazard 16
FIGURE 2-2 On/Standby Button and Rotary Switch 17
FIGURE 2-3 Rotary Switch Positions 19
FIGURE 2-4 Finger Holds on the Bezel 21
FIGURE 2-5 Removing the Server Cover 28
FIGURE 2-6 Two Methods of Hanging the Detached Cover on a Netra 240 Server 29
FIGURE 2-7 Opening the Rotating Service Module 31
FIGURE 2-8 Grounding Point in the Server 32
FIGURE 3-1 Finger Holds on the Bezel 34
FIGURE 3-2 Disconnecting the Bezel Cables 35
FIGURE 3-3 Removing and Replacing the Air Filter From the Bezel 37
FIGURE 3-4 Removing and Inserting a System Configuration Card 39