xi
Tables
TABLE 1-1 Pin Crossovers for Connecting to a Typical Terminal Server 3
TABLE 1-2 Entries for hardwire In the /etc/remote File 4
TABLE 2-1 What ALOM Monitors 14
TABLE 2-2 ALOM Configuration Commands 16
TABLE 2-3 ALOM FRU Commands 17
TABLE 2-4 ALOM Log Commands 18
TABLE 2-5 ALOM Status and Control Commands 18
TABLE 2-6 Other ALOM Commands 20
TABLE 3-1 Methods of Obtaining the ok Prompt 30
TABLE 3-2 OpenBoot Configuration Variables Stored on the System Configuration Card 31
TABLE 4-1 LED Behavior and Meaning 38
TABLE 4-2 LED Behaviors With Assigned Meanings 38
TABLE 4-3 Bezel Server Status Indicators 40
TABLE 4-4 Locator LED Commands 41
TABLE 4-5 Alarm Indicators and Dry Contact Alarm States 42
TABLE 4-6 Device Identifiers and Devices 45
TABLE 5-1 SSH Server Attributes 57
TABLE 6-1 Disk Slot Numbers, Logical Device Names, and Physical Device Names 67
TABLE A-1 Alarm3 Behavior 92
TABLE A-2 Watchdog Timer Error Messages 94