20 Netra T2000 Server Administration Guide • September 2006
Other ALOM Commands
TABLE 2-6 lists other ALOM commands.
Basic ALOM Tasks
Once you have logged in to ALOM as admin and specified the admin password,
you can perform some common administrative tasks:
■ “To Reset ALOM” on page 20
■ “To Switch Between the System Console and ALOM” on page 21
■ “To Control the Locator LED” on page 21
■ “To Reset the Host Server” on page 21
■ “To View Environmental Information About the Server” on page 21
■ “To Reconfigure ALOM to Use the Ethernet (NET MGT) Port” on page 22
■ “To Add ALOM User Accounts” on page 23
■ “To Remove an ALOM User Account” on page 23
■ “To Log In to ALOM” on page 24
■ “To Change an ALOM Password” on page 24
■ “To Set Up Email Alerts” on page 24
■ “To Back Up Your ALOM Configuration” on page 25
■ “To Display Your ALOM Version” on page 25
▼ To Reset ALOM
Resetting ALOM reboots the ALOM software. Reset ALOM after you have changed
settings for ALOM or if ALOM stops responding for any reason.
● At the sc> prompt, type resetsc.
TABLE 2-6 Other ALOM Commands
Command Summary Example
help Displays a list of all ALOM commands, or of a
particular command, with their syntax and a
brief description of how each command works.
sc> help poweron
logout Logs out from an ALOM shell session.
sc> logout
resetsc [-y] Reboots ALOM. The -y option enables you to
skip the confirmation question.
sc> resetsc
To Next Page
Loading...
