10 Netra T2000 Server Administration Guide • September 2006
▼ To Obtain the OpenBoot Prompt From the
ALOM Prompt
● Type the break command.
▼ To Obtain the OpenBoot Prompt When the
Solaris OS Is Running
● Type the init 0 command at the Solaris prompt.
▼ To Terminate a Session When Connected to the
System Controller Through the Serial Port
■ If you are at the Solaris console or the OpenBoot PROM go to the ALOM prompt
by typing the escape sequence, then terminate the ALOM prompt session by
typing logout and pressing Return:
■ If you are connected through a terminal server invoke the terminal server’s
command to disconnect the connection.
■ If the connection was established using a tip command, then type the tip exit
sequence ~.(tilde and a period):
sc> break
{2} ok
# init 0
{1} ok
sc>logout
~.
To Next Page
Loading...
Need help?
General
