Sun Microsystems Netra T2000 - To Log in to ALOM; To Change an ALOM Password; To Set up Email Alerts

24 Netra T2000 Server Administration Guide • September 2006
▼ To Log In to ALOM
1. Establish a connection with ALOM.
2. When the connection is established, type #. (hash-period) to escape from the
system console.
3. Type in your ALOM login name and password.
▼ To Change an ALOM Password
● To change your password, use the password command.
● To change a user account password, use the userpassword username command.
▼ To Set Up Email Alerts
Note – You can configure email alerts for up to eight users. You can configure each
email address to receive its own severity level of alert.
1. Ensure that ALOM is set up to use the Ethernet network management port (NET
MGT), and that the network interface variables are configured.
See “To Reconfigure ALOM to Use the Ethernet (NET MGT) Port” on page 22.
2. Configure email alerts and mail host. Type:
3. Configure each alert recipient. Type:
where:
■ emailaddress is in the form of emailusername@maildomain
■ alertlevel is 1 for critical, 2 for major, and 3 for minor
4. Repeat Step 3 for each alert recipient.
ALOM email alerts are displayed in the following format:
sc> setsc if_emailalerts true
sc> setsc mgt_mailhost ipaddress1,...
sc> setsc mgt_mailalert emailaddress alertlevel