Sun Microsystems Netra T2000 - To Obtain the ALOM Prompt from the Openboot PROM; To Obtain the ALOM Prompt from the Solaris Console

8 Netra T2000 Server Administration Guide • September 2006
▼ To Obtain the ALOM Prompt From the Solaris
Console
● When connected to the Solaris console, type the escape sequence to take the
console to the ALOM prompt.
By default the escape sequence is #. (hash-period).
For instance, if the escape sequence is the default of #. you will type:
Note – Unlike the example, you will not see the #. being typed.
When you type the first character of the escape sequence, there is a one-second delay
before the character appears on the screen. During this interval, you must type the
second character of the escape sequence. If the escape sequence is completed within
the one-second interval, the sc> prompt appears. Any characters typed after the
second escape character are appended to the sc> prompt.
If the second escape character is incorrect, or is typed after the one-second interval
has expired, then all characters are output at the original prompt.
▼ To Obtain the ALOM Prompt From the
OpenBoot PROM
● Type the sequence of escape characters.
By default, the escape sequence is #. (hash-period).
Note – Unlike the example, you will not see the #. being typed.
# #.
sc>
{2} ok #.
sc>