104 Netra T2000 Server Administration Guide • September 2006
password (ALOM command), 16
passwords
changing ALOM, 24
setting initial, 15
users and security, 55
patch panel, terminal server connection, 2
physical device name (disk drive), 67
port reconfiguring, 22
powercycle (ALOM command), 19
poweroff (ALOM command), 19, 30
poweron (ALOM command), 19, 30
probe-ide (OpenBoot command), 29
probe-scsi-all (OpenBoot command), 29
R
RAID
device names, 67
mirrored volume
creating, 67
default boot device, 70
hot-swapping, 78
operations, 66
requirements, 63
striped volume
creating, 71
hot-swapping, 79
technology, 64
volume
configuring, 73
deleting, 76
RAID (redundant array of independent disks), 63
RAID 0 (striping), 65
RAID 1 (mirroring), 65
raidctl (Solaris command), 67 to 79
relay state
normally closed (NC), 43
normally open (NO), 43
remote (network) connections
SSH, 57
removefru (ALOM command), 17
reset
ALOM, 20
manual system, 30
reset (ALOM command), 19, 30
resetsc (ALOM command), 20
restartssh (ALOM command), 60
run levels
explained, 9
ok prompt and, 9
S
sc> commands
bootmode reset_nvram,34
console,35
reset,34
sc> prompt
about, 7
Secure Shell (SSH) protocol
host keys, 60
SSHv2 server, 57
security
additional considerations, 60
guidelines, 55
users and passwords, 55
selecting a boot device, 44
serial management port, 1
establishing communication, 2
service required indicator, 40
setalarm (ALOM command), 19
setdate (ALOM command), 16
set-defaults (OpenBoot command), 35
setkeyswitch (ALOM command), 19
setlocator (ALOM command), 19
setsc (ALOM command), 5, 16
setupsc (ALOM command), 16
showcomponent (ALOM command), 19
showdate (ALOM command), 17
showenv (OpenBoot command), 31
showenvironment (ALOM command), 19
showfaults (ALOM command), 19
showfru (ALOM command), 17
showkeyswitch (ALOM command), 19
showlocator (ALOM command), 19
showlogs (ALOM command), 18
shownetwork (ALOM command), 6, 19
showplatform (ALOM command), 17
showsc (ALOM command), 17
showusers (ALOM command), 17
shutdown (Solaris command), 29, 30
SNMP, 56
Solaris commands