Chapter 6 Managing Disk Volumes 77
3. To delete the volume, type the following command:
For example:
If the RAID volume is an IS volume, the deletion of the RAID volume is interactive,
for example:
The deletion of an IS volume results in the loss of all data that it contains. As an
alternative, you can use the –f option to force the deletion if you are sure that you
no longer need the IS volume, or the data it contains. For example:
4. To confirm that you have deleted the RAID array, type the following command:
For example:
For more information, see the raidctl(1M) man page.
# raidctl -d mirrored-volume
# raidctl -d c0t0d0
RAID Volume ‘c0t0d0’ deleted
# raidctl -d c0t0d0
Deleting volume c0t0d0 will destroy all data it contains, proceed
(yes/no)? yes
Volume ’c0t0d0’ deleted.
#
# raidctl -f -d c0t0d0
Volume ’c0t0d0’ deleted.
#
# raidctl
# raidctl
No RAID volumes found
To Next Page
Loading...
