EasyManuals Logo

Sun Microsystems Sun SPARC Enterprise M4000 Administration Guide

Sun Microsystems Sun SPARC Enterprise M4000
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
86 SPARC Enterprise Mx000 Servers Administration Guide August 2009
One way to preserve copies of your licenses and license keys is to save the output of
the showcodlicense -v command. You can cut-and-paste the output to restore any
lost license keys. For example:
To restore lost licenses, enter a command similar to the following for each lost
license:
License Allocation
The XSCF firmware allocates COD licenses automatically on a first-come, first-
served basis. However, you can reserve licenses if you want to make sure a specific
number of COD licenses are allocated to a particular domain.
Licenses are allocated to COD resources either when a domain with a COD board is
powered on or when a new COD board is installed and powered on.
At board power on, the Service Processor determines which processing resources are
in working order and requests licenses for them. The XSCF firmware checks its
license database and current usage, determines which boards are COD boards, and
allocates licenses to their resources. It then tells the Service Processor which
resources to configure into the domain.
The Service Processor configures only the COD resources approved by the XSCF
firmware. Any COD resource that remains unlicensed is not configured into the
domain and is assigned a COD-disabled status.
When you remove a COD board from a domain through a reconfiguration operation,
when a domain containing a COD board is shut down normally, or when the Service
Processor detects a fault and unconfigures a board from the domain, the COD
licenses for the resources on those boards are released and added to the pool of
available licenses.
License allocation does not change during a Service Processor reboot or failover. All
licenses remain allocated to their resources.
XSCF> showcodlicense -v
Description Ver Expiration Count Status
----------- --- ---------- ----- ------
PROC 01 NONE 3 GOOD
01:803a9241:000000002:0301010100:3:00000000:XXXXXXXXXXXXXXXXXXXXXX
PROC 01 NONE 2 GOOD
01:803a9241:000000003:0301010100:2:00000000:XXXXXXXXXXXXXXXXXXXXXX
XSCF>
XSCF> addcodlicense
01:803a9241:000000002:0301010100:3:00000000:XXXXXXXXXXXXXXXXXXXXXX

Table of Contents

Other manuals for Sun Microsystems Sun SPARC Enterprise M4000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sun Microsystems Sun SPARC Enterprise M4000 and is the answer not in the manual?

Sun Microsystems Sun SPARC Enterprise M4000 Specifications

General IconGeneral
BrandSun Microsystems
ModelSun SPARC Enterprise M4000
CategoryServer
LanguageEnglish

Related product manuals