92 SPARC Enterprise Mx000 Servers Administration Guide • August 2009
2. Type the setcod command and a headroom number of zero:
3. Verify that the headroom is disabled by typing the showcod command.
For example:
▼ To Display COD Information
1. Log in to the XSCF console with platadm, platop, domainadm,ordomainop
privileges, or domainmgr privileges for a specific domain.
2. Type the showcod command.
The output displays the server’s Chassis HostID, number of licenses (PROC RTUs
installed), headroom quantity, and number of licenses reserved for each
domain. For example:
To display COD information only for a specific domain, use the showcod -d
domain_id command, where domain_id can be 0-23 depending on system
configuration.
▼ To Display COD License Status
1. Log in to the XSCF console with platadm or platop privileges.
XSCF> setcod 0
XSCF> setcod 0
XSCF> showcod
Chassis HostID: 80d88800
PROC RTUs installed: 8
PROC Headroom Quantity: 0
...
XSCF> showcod
Chassis HostID: 80e3e446
PROC RTUs installed: 10
PROC Headroom Quantity: 0
PROC RTUs reserved for domain 0: 4
PROC RTUs reserved for domain 1: 0
PROC RTUs reserved for domain 2: 0
PROC RTUs reserved for domain 3: 0
To Next Page
Loading...
Need help?
General
