Chapter 6 Log Archiving Facility 81
3. Type the setarchiving enable command:
After tests indicate the archive host is set up correctly, log archiving is enabled
effective immediately. If the tests fail, you receive an error message that log
archiving was not enabled, and the reason why.
▼ To Disable Log Archiving
1. Log in to the XSCF console with platadm privileges.
2. Type the setarchiving command:
▼ To Display Log Archiving Configuration and
Status
1. Log in to the XSCF console with platadm, platop,orfieldeng privileges.
2. Type the showarchiving command:
▼ To Display Log Archiving Error Details
1. Log in to the XSCF console with platadm, platop,orfieldeng privileges.
2. Type the showarchiving command:
The details of the last ten archiving failures will be displayed.
XSCF> setarchiving enable
XSCF> setarchiving disable
XSCF> showarchiving
XSCF> showarchiving -e
To Next Page
Loading...
Need help?
General
