1
CHAPTER
1
Introduction to Server Software and
Configuration
This manual describes initial system configuration of the SPARC Enterprise
™
M3000/M4000/M5000/M8000/M9000 servers. This product line has entry-level
(M3000), midrange (M4000 and M5000) and high-end (M8000 and M9000) servers.
Note – The midrange and high-end servers support the following features, while
the entry-level server does not: Dynamic Reconfiguration (DR), multiple domains,
PCI hotplug, Capacity on Demand (COD), and the optional External I/O Expansion
Unit.
Once you have completed the initial configuration processes described here, see the
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide for
day-to-day system administration and management tasks.
This chapter provides an overview of server firmware, server software, and initial
system configuration. It has these sections:
■ XSCF Firmware
■ Solaris OS Software
■ Software Services
■ Preparing for System Configuration
■ Related Information
To Next Page
Loading...
Need help?
General
