Chapter 7 Capacity on Demand 91
▼ To Increase or Decrease Headroom
1. Log in to the XSCF console with platadm privileges.
2. Type the setcod command.
You can use one of two methods, as follows.
■ Use setcod command with the headroom option:
where headroom can be a number from 1 to 4. For example:
■ Use the setcod command with no options.
If you are not sure of the headroom that is available, enter the setcod command
with no options; the output displays the number of available licenses and the
current headroom quantity (a number from 0 to 4).
You are prompted to enter the headroom number. Press Return when finished.
3. Verify the headroom quantity is correct by typing the showcod command.
For example, if you entered 4 as the headroom number, the output would be
similar to:
▼ To Disable Headroom
1. Log in to the XSCF console with platadm privileges.
XSCF> setcod headroom
XSCF> setcod 4
XSCF> setcod
COD
---
PROC RTUs installed: 8
PROC Headroom Quantity (0 to disable, 4 MAX) [0]:4
WARNING: Using headroom requires you to install license key(s)
within 30 days. Do you agree? [y|n]: y
XSCF> showcod
Chassis HostID: 80d88800
PROC RTUs installed: 8
PROC Headroom Quantity: 4
...
To Next Page
Loading...
Need help?
General
