Contents vii
▼ To Display XSCF Network Configuration 34
▼ To Set the Service Processor Host Name and DNS Domain Name 35
▼ To Set the Service Processor’s DNS Name Server 35
▼ To Enable or Disable Use of an LDAP Server for Authentication and
Privilege Lookup 36
▼ To Configure the XSCF as an LDAP Client 36
▼ To Configure the XSCF as an NTP Client 37
▼ To Configure the XSCF as an NTP Server 37
▼ To Display the NTP Configuration 38
▼ To Set the Timezone, Daylight Saving Time, Date, and Time Locally on the
Service Processor 38
▼ To Create a USM User Known to the SNMP Agent 39
▼ To Display USM Information for the SNMP Agent 40
▼ To Create a VACM Group 40
▼ To Create a VACM View 40
▼ To Give a VACM Group Access to a VACM View 41
▼ To Display VACM Information for the SNMP Agent 41
▼ To Configure the SNMP Agent to Send Version 3 Traps to Hosts 42
▼ To Enable the SNMP Agent 43
▼ To Display SNMP Agent Configuration 43
▼ To Enable or Disable the Service Processor HTTPS Service 44
▼ To Enable or Disable the Service Processor Telnet Service 45
▼ To Configure the Service Processor SMTP Service 45
▼ To Enable or Disable the Service Processor SSH Service 45
▼ To Generate a Host Public Key for SSH Service 46
▼ To Set the Altitude on the Service Processor 46
Related Information 47
4. Domain Configuration 49
About Domains 49
To Next Page
Loading...
Need help?
General
