16 SUNFAR C300
C300 series of non-sensor current vector-control inverter manual
4.3 List of State monitor parameter
Monitor Code Content Unit
d-0 Current output frequent Hz
d-1 Current output current (Valid) A
d-2 Current output voltage (Valid) V
d-3 Rotational speed of motor Rpm
d-4 DC bus voltage V
d-5 Input voltage of inverter V
d-6 Setting freq. Hz
d-7 Count value of Internal counter
d-8 PID setting value
d-9 PID feedback value
d-10
Running linear speed
m/s
d-11
Settin
linear s
eed
m/s
d-12 Analog input voltage VC V
d-13 Reserved
d-14 Analog input current CC mA
d-15 Reserved
d-16 State of input terminal
d-17 Temperature of module ºC
d-18 Analog output AVO
d-19 Reserved
d-20 Magnetization current
A
d-21 Magnetization current setting
A
d-22 Torque current
A
d-23 Torque current setting
A
d-24 Operation frequency Hz
d-25 Reserved
d-26
First fault record
d-27
Second fault record
d-28
Third fault record
d-29
Fourth fault record
d-30
Fifth fault record
To Next Page
Loading...
