Sunfar C300 Series User Manual

SUNFAR C300 23
C300 series of non-sensor current vector-control inverter manual
Parameters’
Types
Function Code Name Setting range
Minimum
Setting
Manufacture
Setting
Modify
Limit
F1.20
Parameters
self-determination
0：Invalid
1：Determine parameters when motor is
static
2 ： Determine parameters when motor
runs
3：Both 1 and 2.
1 0 ★
F1.21
Selection of
starting pre-excitation
The first part of LED (form right to left):
0：Starting pre-excitation is Valid
1：Starting pre-excitation is Invalid
The second part of LED:
0：Prepare pre-excitation is valid when
zero frequency
1：Prepare pre-excitation is invalid when
zero frequency
The third and fourth part of LED ：
Reserved
1 0001
F1.22
Pre-excitation of starting
time
0.10～2.00Sec 0.01 0.30 ★
Primary applied parameter unit
F1.23
Self-adapting rectify of
motor parameters
The first part of LED (form right to left):
0：Self-adapting rectify of stator
resistance will invalid.
1：Self-adapting rectify of stator
resistance will valid.
The second part of LED
0：Self-adapting
rectify of excitation current will invalid
1：Self-adapting
rectify of excitation current will valid.
The third part of LED：
0：Self-adapting ectify of rotor
resistance will invalid.
1：Self-adapting ectify of rotor
resistance will valid.
The fourth part of LED：Reserved
1 0010

Sunfar C300 Series Specifications

General

Brand	Sunfar
Model	C300 Series
Category	Inverter
Language	English