SUNFAR C300 29
C300 series of non-sensor current vector-control inverter manual
Parameters’
Types
Function Code Name Setting range
Minimum
Setting
Manufacture
Setting
Modify
Limit
F4.14
Automatic voltage regulation
(AVR)
0:Invalid 1: Dynamic valid
2:Static valid
1 2
F4.15 Reserved
F4.16 Dead time of FWD&REV 0.0~5.0 S 0.1 0.0 ★
F4.17 Acceleration time 2 0.1~6000 s/min 0.1 ▲
F4.18 Deceleration time 2 0.1~6000 s/min 0.1 ▲
F4.19 Acceleration time 3 0.1~6000 s/min 0.1 ▲
F4.20 Deceleration time 3 0.1~6000 s/min 0.1 ▲
F4.21 Acc time 4/Jog Acc time 0.1~6000 s/min 0.1 ▲
F4.22 Dec time 4/Jog Dec time 0.1~6000 s/min 0.1 ▲
F4.23
Modified rated of
UP/DW terminals
0.01~100.0Hz/Sec 0.01 10.00
F4.24
Start voltage of
dynamic braking
600~750V 1 700V
F4.25
Action ratio of
dynamic braking
10~100(%) 1 60%
F4.26
Restart after power down
setting
The first part of LED:
0:Invalid 1: Valid
The second part of LED:
0:Routine mode
1:Detect speed and restart mode
The third and fourth part of LED :
Reserved
1 0010 ★
F4.27
Waiting time of restart after
power down
0.0~10.0 s 0.1 0.5 ★
Auxiliary running parame
F4.28 Reserved