Name: Sungrow AC011E-01
Brand: Sungrow
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Step 4 Install the upper mounting plate and lower mounting plate.

1 Place the charger face-down on a clean and flat surface, and secure the upper and low-

er mounting plates to the pole using a screwdriver.

2 Ensure that the upper mounting plate and the lower mounting plate are firmly installed.

3 Hang the charger onto the backplate.

4 Secure the upper and lower mounting plates to the backplate.

5 Check whether the charger is correctly installed on the pole.

- - End

2 Installation User Manual

Other manuals for Sungrow AC011E-01

Questions and Answers:

Need help?

Do you have a question about the Sungrow AC011E-01 and is the answer not in the manual?

General

Model	AC011E-01
Category	Battery Charger
Output Power	11 kW
Frequency	50/60 Hz
Operating Temperature	-25°C to +60°C
Protection	Overvoltage, Overcurrent, Short Circuit, Over Temperature
Communication	RS485/CAN