Sunless VersaSpa Pro - Setup; VersaSpa Pro Installation; Connecting to Wifi

3.1 Versa6SDPro
TM
Installation
There is a separate Versa6SDPro
TM
Assembly Manual. All Versa6SDPro
TM
units must
be installed by a Sunless, Inc. Certified Installer/Trainer (CIT).
3.2 Connecting to Wifi
Your Versa6SDPro
TM
has built in Wifi functionality that allows your unit to communicate
with your own Dashboard on Sunless Inc.’s Cloud Service and will also allow you to
receive automatic over-the-air updates. Further, you can also send tech support
requests directly from the touchscreen controller to Sunless Inc.’s Tech Support
Department. Connecting to Wifi and using Sunless Inc.’s Cloud Service provides you
with the following functionality:
•
Statistics and Reporting: All session data will be pushed to the cloud including session
type, solution used, volume of solution used, body part sprayed, etc.. This information
will be presented in the dashboard using various graphs and filters for your review.
Also, the data can be exported for further use or integration with other business tools.
•
Error Reporting: All machine fault codes will be reported to the dashboard. From the
dashboard you can select a number of people to receive email notifications when
there is a fault and also select to have Sunless Inc. Tech Support Department receive
a notification.
•
Machine Settings: You will be able to upload your specific machine configuration file to
your dashboard to save and for use on other units, if you have multiple units.
**Note: Some of the Cloud functionality may not be available at initial launch of the
Versa6SDPro
TM
. Features may be added over time and existing features may change
over time.
To connect your machine to Wifi, make sure your salon has a working Wifi router with
an internet connection. Have your Wifi password ready and also the Admin password
for the Versa6SDPro
TM
.
1. Go to the Dashboard on the Touchscreen Controller.
2. Input your Admin Password.
3. Click the right Wifi Tab on the main Dashboard Screen.
4. Select your Wifi network.
5. Enter you Wifi password.
6. When it shows connected, close the Dashboard.
The following screen shots show the Wifi setup screens:
Section 3! Setup
18