Sunless VersaSpa Pro - Getting to Know Your VersaSpa Pro; How it Works; Key Component Illustrations

2.1 How it Works
The Versa6SDPro
TM
Heated Sunless Spa Series is an HVLP Automatic Skin
Treatment System that mixes air and one of four treatment solutions into a fine mist.
The mist is then sprayed using 3 HVLP spray nozzles onto the body to produce an
even, whole-body application. Using Favorite sessions, there can be up to 4
applications per session using any of the solutions and spraying different parts of the
body. The solutions are housed in a smart container system so your Versa6SDPro
TM
knows exactly what to do by reading important session information from the solution
container.
During the misting process, the excess mist and air is drawn into the exhaust column
and extraction fan system, flows through a lifetime stainless steel filter, and clean air
exits out the back of the unit. A waterfall type wash-down system is included to rinse
down the inside of the Versa6SDPro
TM
after use along with the lifetime stainless steel
filter and the inside of the extraction fan system. A floor draining system removes
excess water & solution after the misting and wash-down processes.
2.2 Key Component Illustrations
The following illustrations show all of the important components of your Versa6SD
Pro
TM
:
Section 2!
Getting to Know Your Versa6SDPro
TM
5
Spray Column
Touchscreen
Solution Drawer
Roof
Entrance
3/4 Front Wall
Nozzle Housing
Exhaust Column
Full Back Wall
Figure 1
Base