7.3.3 Component Settings:
The settings in this section control important components of your machine. Use care
when adjusting these settings. Consult a Sunless, Inc. Tech before making any
modifications to the settings in this section.
•
Audio Blower Level: This value is a percentage of the nozzle and heater blower
levels and will reduce these levels by this percentage when any audio prompts are
playing. This allows the client to hear the audio prompts better with less blower noise.
•
Heater Pre-Warm Level: If Pre-Warm is enabled in the Machine Settings screen in
Salon Setup (See Section 3.8), the heaters will turn on to warm the interior of the
booth when a session is activated. This level adjusts the heat intensity during this
time.
•
Heater Blower Pre-Warm Level: Same as above, this will adjust the Heater Blower
level during Pre-Warm.
•
Nozzle Blower Pre-Warm Level: The nozzles will also turn on if Pre-Warm is enabled
in the Machine Settings screen in Salon Setup (See Section 3.8). This setting controls
the speed of the nozzle blower during this time.
•
Heater Spray Level: This level adjusts the heat intensity while solution is being
sprayed.
Section 7! Advanced Touchscreen Functions
5
Salon Setup Component Settings Tab
To Next Page
Loading...