Main Dashboard Screen Functions:
•
Unlock Drawer: Selecting this item will unlock the drawer for access to the solution
containers.
•
Close Dashboard: Selecting this will close the Dashboard.
•
Technical Support: Selecting this will bring up a window that will allow you to fill in
some basic information and send a support request directly to Sunless, Inc.’s
Technical Support Department.
•
Wash Booth: Begins the booth washdown cycle.
•
Drain Sump: This function will run the sump pump in case of a rinse or sump pump
fault to manually try to drain the sump basin.
•
Enable Lighting: Selecting this will turn the lights on or off.
•
Purge Solution: This will take you to the purging cycle as described in Section 5.2.
The Purge function is used when changing solution types or for cleaning solution lines
during maintenance.
•
Log Maintenance: Shows a list of general required maintenance and allows for easy
logging of those items. Also allows manual text input by a staff member or tech to
describe any other work completed. The logs are stored on the controller and can be
referenced in the future.
Main Dashboard Sub-Categories:
7.3 Salon Setup:
The Salon Setup Menu is the place to set all machine parameters, component settings,
session parameters, and connect to WiFi. It consists of five tabbed sections including
General, Machine, Component Settings, Session, and WiFi. Below are screen shots of
each section and descriptions of each setting:
Section 7! Advanced Touchscreen Functions
5
To Next Page
Loading...