EasyManua.ls Logo

Sunless VersaSpa Pro - Using Your VersaSpa Pro; How To Tan

Default Icon
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.1 How To Tan
Tanning Tips
Shower and exfoliate skin prior to all Versa6SDPro
TM
tanning sessions. Our specially
formulated solution is applied and absorbed into the top layers of the skin and will fade
with the natural exfoliation process of the skin.
Remove all jewelry. Body piercing jewelry can remain.
Bring along dark-colored, loose-fitted clothing to wear after tanning (preferably cotton).
All other solutions besides the Pro Bronzer Tanning solution will not rub off on clothes.
Wait at least 6 hours before showering, moisturizing, or participating in any strenuous
activity.
Application Process
Safety Warnings:
CAUTION: Slippery Conditions. Move slowly and use extreme care to avoid slipping
after applying barrier cream to hands and feet and when moving inside and around the
Versa6SDPro
TM
booth.
CAUTION: Consult physician before using the Versa6SDPro
TM
booth if you are
pregnantor if you think you may be pregnant.
See Preface Section of this document for additional Warnings/Cautions before using
the Versa6SDPro
TM
booth.
FDA Recommendation on DHA: The active ingredient most often used in all sunless
tanners including tinted moisturizers, self-tanners, and spray tan solution is calledDHA
or dihydroxyacetone. DHA is a carbohydrate (monosaccharide sugar) com- pound
approved by the FDA for use in externally applied sunless tanning solutions.For
misting applications, the FDA recommends protective measures to prevent eye
contact, inhalation or ingestion.
Versa6SDPro
TM
Stances
The Versa6SDPro
TM
typically uses a 4-position stance for tanning treatments and a 2-
position stance for other applications. The number of sprays for each solution can be
modified for each solution (see Section 3.7). It also can also use two different types of
drying sequences, one that dries after each spray pass or one that completes all dry
passes after all the spray passes are complete. The number of dry passes can also be
modified for each solution. Check with the salon operator for the exact number of spray
and dry passes for each application.
Section 4!
Using Your Versa6SDPro
TM
27

Table of Contents

Related product manuals