OPERATION & MAINTENANCE MANUAL SWDE120B-3
Wear a regulated mask to prevent
inhaling dust when removing paint
with abrasive paper or sand wheel.
Remove paint with solvent or paint
remover. Clean paint remover with
soap and water and wait for about 15
minutes for solvent to evaporate before
welding.
Paint removal work should be
conducted outdoors or in a well
-ventilated area.
1.32 Liquid Disposal
All fuels, most lubricants, and some coolants are
flammable. These flammable liquids should be
stored away from fire. Do not burn or punch any
liquid containers.
Dispose of fuel carefully; stop engine
before adding fuel; prohibit smoking while
adding fuel. Add fuel outdoors.
Do not put oil-containing rags on the
machine to ensure the machine stays clean.
1.33 Chemical Disposal
Touching harmful chemicals directly will
cause serious injury to the human body.
The chemicals used in this piling rig, such
as lubricant, coolant, paint, and adhesive
may be harmful.
Before using harmful chemicals, check and
understand its danger; know how to use
them safely.
To Next Page
Loading...