OPERATION & MAINTENANCE MANUAL SWDE120B-3
4.2 ENGINE OPERATION
4.2.1 Check Diesel Engine
Park the machine at level road, check the
oil surface height. (Power off the engine, wait
for 15 minutes to let the oil to return to the
bottom of the tank.)
The oil surface should be between the
MIN and MAX of the oil level gauge.
Please refer to the Cummins Diesel
Engine Operator’s Manual to get the
operating and maintaining details of the
engine.
4.2.2 Before Starting Engine
Switch off the pilot controlled valve and
keep the pilot lever, traveling rod in
natural state (Neutral position). Operator
sits down on the seat.
Turn the key to ON position (Operating), all the monitor system indicators are on light
except working hour meter, LCD block and the buzzer would moo. The monitor system
would be on normal working state after self-checking for 2 seconds.
4.2.3 Starting Engine
1. Switch off the pilot controlled valve.
2. Turn the key to ON position.
3. Bugle to warn persons around.
4. Turn the key right to START position to start the engine. Release the key, the switch
To Next Page
Loading...