SUNWARD SWDE120B-3 - Safety Rules; Safety Mark; Safety Label; General Safety Instruction

OPERATION & MAINTENANCE MANUAL SWDE120B-3
Table of Content
1. Safety Rules...........................................................................................................................1
1.1 Safety Mark................................................................................................................. 1
1.2 Safety Label................................................................................................................. 1
1.3 General Safety Instruction........................................................................................... 1
1.4 Preparation for Emergency.......................................................................................... 2
1.5 Wear Safety Protective Gear....................................................................................... 2
1.6 Check Machine Before Start-up.................................................................................. 3
1.7 Adjust Operator Seat....................................................................................................3
1.8 Enter or Leave Machine Correctly.............................................................................. 3
1.9 Start Engine Correctly................................................................................................. 3
1.10 No Passenger Allowed In The Cab............................................................................4
1.11 Keep Machine Away From Power Line.................................................................... 4
1.12 Move Machine Safely................................................................................................4
1.13 Prevent Accidents While Backing Up or Swinging.................................................. 4
1.14 Safe Operation........................................................................................................... 5
1.15 Avoiding Runaway Accidents................................................................................... 5
1.16 Parking Machine Safely.............................................................................................6
1.17 Safe Maintenance.......................................................................................................6
1.18 Supporting Machine Correctly.................................................................................. 7
1.19 Trash Cleaning...........................................................................................................8
1.20 Preventing Battery Explosion.................................................................................... 8
1.21 Storing Spare Parts Safely......................................................................................... 8
1.22 Preventing Splashing Attacker.................................................................................. 9
1.23 Preventing Parts From Flying Off............................................................................. 9
1.24 Keep Away From Transmission Parts....................................................................... 9
1.25 Prevent Inhaling Asbestos Dust.................................................................................9
1.26 Beware Of Inhaling Smoke or Exhaust Gas............................................................ 10
1.27 Beware of scalding.................................................................................................. 10
1.28 Be Careful Of Pressured Liquids.............................................................................10
1.29 Avoid Heating near A Pressured Oil Pipe............................................................... 11
1.30 Avoid Heating Flammable Liquid Pipe...................................................................11
1.31 Remove Paint before Welding or Heating...............................................................11
1.32 Liquid Disposal........................................................................................................12
1.33 Chemical Disposal................................................................................................... 12
1.34 Fire Prevention.........................................................................................................13
2. CAB..................................................................................................................................... 14
2.1 CAB........................................................................................................................... 14
2.2 CAB CONTROL HANDLE & DASHBOARD LAYOUT...................................... 15
2.3 Electric Control Section of Cab.................................................................................16
2.4 Main Operating Interface...........................................................................................17
2.4.1 Parameter Interface.........................................................................................19
2.4.2 Settings Interface............................................................................................ 20
2.4.3 Inclination Interface........................................................................................21
2.4.4 Drilling Depth Detection Interface................................................................. 22
2.4.5 Fault Code Interface....................................................................................... 23
2.4.6 IO Port Interface............................................................................................. 24