FOREWORD
The manual shall be read carefully and understood correctly to help you operate and
maintain your machine safely and properly, otherwise, personal injury and machine damage
may occur.
The safety attentions and labels are mentioned in the manual and fixed on the machine
providing the instructions of potential risks and the way to avoid that.
It’s impossible for SUNWARD to predict all the potential risks. Thus, the safety rules
are mentioned in the manual and on the machine only referring to the basic safety rules
instead of all possible safety precautions. Necessary measures should be taken by you to
ensure the safety if there’s no specified, recommended or allowed methods or actions in the
manual.
The forbidden usages or operations in the manual shall be observed strictly under any
circumstances.
The machine is designed according to the metric system, all the data presented are
metric, even if the inch size is lined out, which is still transformed by the metric size. Besides,
only metric parts and tools can be used.
The manual should be regarded as the permanent part of your machine and kept in the
cab for consultation at any time. Please contact SUNWARD or authorized dealers to
purchase a new one if it’s damaged or lost. Meanwhile, it should be attached when the
machine is transferred or sold.
Only qualified, experienced operators or who received an official license after a
standard training can operate, check or maintain this machine.
The instructions, data and charts covered by this manual are the latest product
information as of its date of issue. The manufacturer SUNWARD reserves the right to make
any modification or amendment of any nature from time to time and without prior notice,
deemed useful or necessary, to any machine component, without any obligation to amend the
content of this manual accordingly. Pictures and data contained in this manual are not
binding. Consequently, no claim raised in this respect will be considered.
Please contact SUNWARD or authorized dealers for any questions about the latest
material or the material referred in the manual.
SUNWARD INTELLIGENT EQUIPMENT CO., LTD.
To Next Page
Loading...