SUNWARD SWDE120B-3 - Protecting Measures for Long Term Storage

OPERATION & MAINTENANCE MANUAL SWDE120B-3
86
7.10 Protecting Measures for Long Term Storage
Please take protecting measures as following if the machine should be stored over one
month.
Protecting Measures for Long Term Storage
Content
Wash machine
Wash the machine body and repair it completely
Fill lubrication oil and
grease
Check the lubrication oil if it is not enough or dirty. Fill
grease into all the parts needing lubrication. Apply oil
onto the parts easy to be rust.
Battery
Disassemble the battery. Keep it in storage after being
charged fully.
Cooling water
Fill in antirust. If it is possible to be frozen, fill in
antifreeze or empty cooling water fully and hang a brand
read “NO WATER IN RADIATOR” inside the cab.
Dust and damp proof
Store the machine in dry garage and cover the machine
with hood.
Tools
Store after checking and repairing.
Lubrication operating –
Run machine at low speed
for several minutes
Parts would be rusty and result in abnormal abrasion in
next operating if the oil film on them is damaged. To
avoid this problem, run the machine at least one time per
month to lubricate the parts. At the same time, check
liquid level of cooling water and lubrication oil.
Attention
1. For “Lubrication operating”, it means to warm up the machine by running motor, lifting,
rotating etc. twice or 3 times.
2. Lubrication oil and grease may become bad although the machine is not operated. Thus,
do complete check before operating.